The CS10-CM11 doctor call and doctor presence buttons device can be placed next to beds or in another position in the rooms, wards or day rooms. When the call button is pressed a doctor, call is triggered and the LED indicator is switched on with blue colour to inform the healthcare professional that the call has been recognized by the system. The presence button is used to inform the system that there is a doctor in the room. When this button is pressed, the LED indicator is switched on with blue colour to inform the doctor that the presence has been recognized by the system. If the presence button is in active mode and a nurse call is triggered, this call will be recognized by the system as an emergency call. When the doctor finishes the support, the doctor must press the presence button again to reset the call and to reset the presence. The call and presence buttons have indicator lights to help to locate the buttons in the dark.
The CS10-CM11 is a standard 45x45 modular device with double capacitive buttons (call and presence).